VibraWaste

Services

Muckraker Septage Screener

The Muckraker septage screener is a vibrating perforated-basket machine. It is rated up to 400 gallons per minute, with 3/16 inch openings, and an auger that compresses what the basket holds. After setup it runs on a single-phase 240V RV plug.
The Muckraker on a gravel pad with an operator
The Muckraker on a gravel pad with an operator

The Waste Screening Machine

The Muckraker is a wastewater vibratory screener. Trucks unload into the feed box. A vibrating basket holds trash larger than 3/16 inch. An auger compacts what it catches, the liquid returns to the tank, and city pads, plants, and private sites run the same machine.

How the Vibratory Screen Runs

This is an automated screening solution. Dual motors vibrate the basket. The auger moves, compresses, and dries the solids. That replaces two-hour rake work at the bar screen.

Industrial Waste Screening Equipment

This industrial waste screening equipment takes septage, blackwater, greywater, and factory wastewater, up to 400 gallons per minute. It is a stainless screen, not a full treatment plant. After setup it plugs into a single-phase 240V RV outlet, a NEMA 14-50R. You skip the three-phase 480V service many electric stations need.

One 3/16 Inch Cut

Flow rate, dewatering, and how the unit sits in your treatment layout decide the fit. The opening stays 3/16 inch. Municipal waste processing or industrial applications: one waste screening machine, one cut.

Less Water Leaving in the Trash

Water weighs over 8 pounds a gallon. The auger sends that water back to the holding tank and leaves lighter solids, closer to landfill paint filter requirements when properly operated. Less contaminated runoff on the pad. Less time on a rake.

Setup

From unload to the first truck dumping is about an hour. A forklift or telehandler sets the unit on a prepared pad, the auger assembly slides into its receivers and friction locks, four travel locks are removed, the hood safety switch goes on, and the unit plugs into a 240V NEMA 14-50R receptacle. Site preparation is the customer's responsibility and is covered in our Pre-Delivery Installation Prep Guide, October 2026.

See the screener run

A clip of a full truck dump. More clips, including the setup walkthrough, are on the videos page.

Muckraker specifications

The Muckraker specifications
Screen typeVibrating perforated-basket screener
Flow capacityUp to 400 gallons per minute (GPM)
Aperture3/16 in, separates trash and debris larger than 3/16 inch
DewateringIntegrated auger compression
Waste streamsSeptage, blackwater, greywater, and industrial wastewater
OutputCompacts captured material for landfill requirements; returns screened liquid to storage or downstream treatment
PowerSingle-phase 240V RV plug

Dimensions

12' x 12' unit (20' x 20' work area) on a level concrete or gravel pad, or 6x6 / 8x8 treated timbers.

the septage receiving station this screener servesbar, drum, and vibrating screenspaint filter and landfill screenings

Muckraker vs Conventional Septage Receiving StationsPricing as of October 2026

How a stainless vibrating screen compares on cost, install, footprint and mobility

Scroll sideways to read every column.

Pricing as of October 2026. VibraWaste Muckraker MR-5 compared with conventional septage receiving station categories on equipment cost, installation, estimated cost before tax and freight, truck unload, footprint, and mobility.
OptionEquipment costInstallationEstimated cost before tax and freightTruck unloadFootprint / infrastructureMobility
VibraWaste Muckraker MR-5Stainless vibrating screen with dewatering auger$140,000*Fixed or mobile option. Your site costs: pad, 240V hookup and discharge connection. About 1 hour from unload to first truck$140,000 equipment price, plus tax, freight and your site costs10-15 min (up to 400 GPM)12' x 12' unit (20' x 20' work area) on a level concrete or gravel pad, or 6x6 / 8x8 treated timbers. Single-phase 240V, 2-pole 30A breaker, 50A plug. No 3-phase.Fixed install or mobile: trailer-mountable with jacks on all four corners. Ships in two pieces.
Integrated drum screening stationScreen, wash and compaction in one tankFrom $350,000 (dual-truck version $700,000+)$110,000 to $300,000Starting price plus estimated installation: from $460,000 (dual-truck $810,000+)5-10 minPermanent installation at the plant; engineered site workFixed install
Rotary sieve unitEnclosed screening unitFrom $289,000$110,000 to $300,000Starting price plus estimated installation: from $399,000About 15 minPermanent installation; no separate rock trap, grinder or receiving tankFixed install
Full-system receiving stationScreening plus flow metering and hauler authenticationFrom $349,000$110,000 to $300,000Starting price plus estimated installation: from $459,000Not publishedPermanent installation; metering, controls, transaction tracking, grinder and screeningFixed install
Configurable receiving stationBuilt-to-order packageFrom $225,000$110,000 to $300,000Starting price plus estimated installation: from $335,000Not publishedPermanent installation; unloading connections, pretreatment, sampling, monitoring, access controlFixed install
Access-control pedestalHauler access and tracking onlyFrom $189,000$110,000 to $300,000Starting price plus estimated installation: from $299,000N/A (no screen)Requires screening already in place at the plantFixed install

Competitor figures are published starting prices (October 2026). The $110,000 to $300,000 installation range is a VibraWaste estimate. *Muckraker price is for pickup at our Oklahoma fabrication shop. Sales tax, freight and your site costs are extra. Pricing subject to change.

These products are not equal in features. The Muckraker does not include flow metering, hauler authentication, transaction tracking, a grinder or a receiving tank. The access-control pedestal has no screen.

What comes standard on the Muckraker

  • Stainless steel construction; 3/16 in. stainless perforated screens
  • Vibrating basket screens up to 400 GPM, no hand raking
  • Auger squeezes water out of trash and debris before disposal
  • Hopper and auger hood safety interlocks
  • Two OLI vibratory motors, backed by OLI's own 24-month motor warranty
  • About 14 amps running draw on single-phase 240V; 25 ft cord included
  • No factory commissioning or startup crew needed. Your electrician hooks up the 240V circuit, and local permits may apply.
  • Screened liquid goes to a frac tank, lagoon, receiving tank or approved sewer where permitted

Why it matters

For haulers. Trucks unload in 10-15 minutes and get back on the route instead of waiting on a hand-raked bar screen. You can put the screen on your own pad or depot, close to where you pump, and trailer-mount it to follow the work. Trash comes off compacted and dewatered, so you stop hauling water.

For plants. Screen hauled waste before it reaches pumps and headworks. The Muckraker runs on a single-phase 240V, 50A RV-style hookup, so there is no three-phase power run, and it can be paired with access-control equipment a plant already has.

For budgets. Published starting prices for the stations in the table range from $189,000 to $700,000 or more before installation, and our estimate for installation is $110,000 to $300,000. Financing may be available through DealerDog, a third-party lender, subject to credit approval. DealerDog sets its own terms and credit review process.

FAQ

Frequently Asked Questions

  • What are the Muckraker septage screener specs?

    A vibrating perforated-basket screen, up to 400 GPM, 3/16 inch openings, and integrated auger compression. It handles septage, blackwater, greywater, and industrial wastewater.

  • What power and plug does the screener use?

    A single-phase 240V RV plug, a NEMA 14-50R receptacle. Many electric stations are built for three-phase 480V, which is hard to get outside industrial zones.

  • What flow is the screener rated for?

    Up to 400 gallons per minute. Trash and debris larger than 3/16 inch stay on the basket. Screened liquid returns to storage or moves on to treatment.

  • What does the auger do with the solids?

    It compresses and dries what the basket catches and sends water back to the holding tank. The solids can meet landfill paint filter requirements when the unit is properly operated.

  • How long does setup take on a prepared pad?

    From unload to the first truck dumping is about an hour. A forklift or telehandler sets the unit on a prepared pad, the auger assembly slides into its receivers and friction locks, four travel locks are removed, the hood safety switch goes on, and the unit plugs into a 240V NEMA 14-50R receptacle. Site preparation is the customer's responsibility and is covered in our Pre-Delivery Installation Prep Guide, October 2026.

  • Where can I watch the screener run?

    The videos page has a full truck dump, a setup walkthrough, and shorter clips of the safety switch and waste gate.

Ask for the septage screener specs

Call VibraWaste at 479-425-1307 or reach Jon Jouvenaux, Founder and President, in Bentonville. Municipal, industrial, and private receiving stations.

Call 479-425-1307Get Financing